Free Shipping
On orders over $50
Quality Guaranteed
Manufacturer backed
30-Day Returns
Hassle-free returns
ACDelco Silver (Advantage) Ceramic Disc Brake Pads are a quality, high value alternative for General Motors vehicles as well as most makes and models and are backed by General Motors. These brake pads have a ceramic formulation that uses less metal, providing quality braking power in a quiet and low-dusting package. Also, hardware clip kits are included where applicable. ACDelco Silver (Advantage) Ceramic Disc Brake Pads are available for all makes and models. ACDelco Silver (Advantage) parts are a good choice for many vehicles on the road today. Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage. ⚠<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov
| Weight | 4.5 lb |
|---|---|
| Slotted | Yes |
| Grade Type | Regular |
| Width (in) | 6 |
| FMSI Number | D976-7877 |
| Height (in) | 2.4 |
| Length (in) | 6.9 |
| Friction Type | Ceramic |
| FAQ - Answer 1 | No, but it is a good idea to inspect them for wear-out, cracking, leaking, etc. |
| FAQ - Answer 2 | Yes, ACDelco also offers GM OE Brake Pads and Professional Brake Pads. |
| FAQ - Answer 3 | No, but it is a good idea to inspect your brake pads at each tire rotation. |
| Chamfered Edges | Yes |
| Inner Pad Width | 5.300 in |
| Outer Pad Width | 5.300 in |
| Backing Material | Steel |
| FAQ - Question 1 | Do I have to replace all my brake parts when replacing my brake pads? |
| FAQ - Question 2 | Does ACDelco offer other grades of brake pads? |
| FAQ - Question 3 | Do I have to replace my brake pads after a certain amount of time? |
| Inner Pad Height | 3.050 in |
| Outer Pad Height | 3.050 in |
| Pad Shims Included | Yes |
| Pad Wear Sensor Type | Mechanical |
| Abutment Clips Included | Yes |
| Pad Wear Sensor Included | Yes |
| Mounting Hardware Included | Yes |
| Inner Pad Overall Thickness | 0.660 in |
| Outer Pad Overall Thickness | 0.660 in |
| Friction Material Attachment | Bonded |
| Friction Material Composition | Ceramic |
| Features & Benefits - Bullet 1 | Ceramic, Semi-Metallic, and Organic formulas provide safety and reliability for a range of vehicle applications |
| Features & Benefits - Bullet 2 | Basic shims, slots, and chamfers help to diminish noise, vibration, and braking harshness |
| Features & Benefits - Bullet 3 | No curing or machining required, ready to be installed right out of the box |
| Features & Benefits - Bullet 4 | Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage |
| Features & Benefits - Bullet 5 | Economical value with dependable quality |
| Features & Benefits - Bullet 6 | For General Motors vehicles as well as most makes and models |
| Good Maintenance Practices - Section 1 - Header | The following inspections and maintenance procedures can help prevent potential brake problems: |
| Good Maintenance Practices - Section 2 - Header | The following should be conducted by a qualified technician: |
| Good Maintenance Practices - Section 1 - Bullet 1 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
| Good Maintenance Practices - Section 1 - Bullet 2 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
| Good Maintenance Practices - Section 1 - Bullet 3 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
| Good Maintenance Practices - Section 2 - Bullet 1 | Inspection of the brake hoses for brittleness or cracking. |
| Good Maintenance Practices - Section 2 - Bullet 2 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
| Good Maintenance Practices - Section 2 - Bullet 3 | Inspection of wheel bearings and grease seals. |
| Good Maintenance Practices - Section 2 - Bullet 4 | Parking brake adjustments (as needed). |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Brake pedal pulsation (not to be confused with normal ABS operation). |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Vehicle pulls to the left or right when brakes are applied. |
| Shipping | 2 |
| Alt Inventory | YES |
| Quantity Required | 1 |
| Dimensional Weight | 0.46 |
